- Completed 7 to 9 residential service calls per day, resolving 94 per cent on the first visit without a return trip
- Repiped 62 homes from galvanised to PEX and copper, passing city inspection on 60 of 62 first submissions
- Diagnosed and cleared drain and sewer blockages using camera inspection and 100 ft sectional machines, cutting repeat call-outs by roughly a third
- Mentored 3 apprentices through their first year of registered hours, including code-book and soldering practice
Plumber Resume Example
Plumbing resumes are screened first for licence status and second for the type of work, because a service plumber who diagnoses call-outs and a new-construction rough-in plumber are barely the same job. Put your state licence number, level and expiry at the top, then make it obvious whether your hours were residential service, commercial or new build. Most rejected plumbing resumes never say which.
Marcus Delgado
Summary
Licensed journeyman plumber with 9 years across residential service and light commercial. Averages 7 to 9 service calls per day with a 94 per cent first-visit resolution rate, and has completed rough-in on 140 residential units.
Experience
- Logged 8,000 registered apprenticeship hours across rough-in, trim-out and service work
- Assisted rough-in plumbing on 140 residential units, installing DWV and water supply to IPC standards
Skills
Education
Certifications
- Ohio Journeyman Plumber Licence #J-48210, valid to 2028
- Backflow Prevention Assembly Tester certification
- OSHA 30-Hour Construction
- Medical Gas Installer, ASSE 6010
Mistakes that cost plumber candidates interviews
- Writing "licensed plumber" with no state, level or licence number, which forces the hiring shop to guess whether you can pull permits
- Listing only tools and pipe materials, when a service company is buying your diagnostic speed and first-visit fix rate
- Hiding apprenticeship hours, which are the single number a shop needs to know whether you can test up
How to write your own version
Work through the example above section by section and replace it with your own detail. The structure is doing most of the work here — what changes is the evidence.
The summary
Two or three sentences: your role, your years of experience, your specialism, and the single strongest number you have. Notice the example does not open with an objective or a statement about what you are seeking. Employers know what you are seeking; the summary is where you say why you are worth reading.
The experience bullets
Start each with a past-tense verb and end it with something measurable. If a bullet could appear on any plumber's resume, it is describing the job rather than describing you. Compare "handled daily operations" with a line that names the volume, the outcome and the timeframe — only one of those tells a hiring manager anything.
Skills and certifications
List the tools and credentials this field actually screens for, spelled the way postings spell them. Where a certification is a legal or practical requirement for the role, put it where it cannot be missed rather than at the foot of the page — for many roles it is a hard filter applied before a human reads anything.
Then tailor it to the posting
One generic resume sent to twenty employers performs worse than one resume adjusted twenty times. Pull the exact terminology from each posting and make sure the true ones appear in yours. Run the finished document through our free ATS checker to see what is missing before you send it, and compare your wording against Purdue University's job search writing guide if you want an independent reference.
More Examples in This Field
Plumber Resume Questions
What should a plumber resume include?
Plumbing resumes are screened first for licence status and second for the type of work, because a service plumber who diagnoses call-outs and a new-construction rough-in plumber are barely the same job. Put your state licence number, level and expiry at the top, then make it obvious whether your hours were residential service, commercial or new build. Most rejected plumbing resumes never say which. In practice that means: a short summary naming the role, your experience with a measurable result on every bullet, the skills and tools this field screens for, your education, and any certifications the role requires.
How long should a plumber resume be?
One page if you have under ten years of experience, two pages beyond that. Length is not the real issue — a two-page resume where every line earns its place beats a one-page resume padded with duties. Cut old roles and generic responsibilities before you cut measurable achievements.
What are the most important keywords for a plumber resume?
Terms that commonly appear in postings for this role include: journeyman plumber, DWV rough-in, PEX crimp and expansion, backflow prevention, water heater installation, sewer camera inspection, IPC code compliance, hydro jetting. Only use the ones that genuinely apply to you, and take the exact wording from the specific posting you are applying to.
Can I use this example as a template?
Use the structure and the way each achievement is phrased, but write your own content. The names and employers here are fictional, and a resume describing work you did not do will not survive an interview. Click "Use this example" to start from this layout with your own details.
Is this resume builder free?
Yes. Every template, the editor, the ATS score checker, the cover letter builder and PDF, Word and image downloads are free, with no account, no trial and no watermark.
Build Your Plumber Resume
Start from this layout, edit in a live preview with an ATS score as you type, and download as PDF, Word or image — free.
Use This Example — Free