Avionics is read for systems and wiring, not general maintenance. Shops want to know the navigation, communication and autopilot systems you have installed or repaired, and how clean your bench and harness work is.
Avionics technician with 7 years on installations and troubleshooting in general aviation and corporate aircraft. Harness fabrication, panel upgrades and systems testing to manufacturer installation manuals.
Here is how to write your own, and what actually gets you the call in this trade.
The first pass answers two practical questions: can you legally do this work, and are you free to start. A foreman with a job beginning next week reads for the licence, the current tickets and the availability, and everything else on the page waits behind those.
The Federal Communications Commission general radiotelephone operator licence is genuinely relevant for work on transmitting equipment. Industry aircraft electronics technician certification and recognised soldering standards such as IPC J-STD-001 are widely respected. Some technicians hold an airframe and powerplant certificate, and repair stations may issue repairman certificates tied to that employer.
Avionics shops need people who can fault-find in wiring, not only replace boxes. Interviews go straight to schematics, grounding and bonding, and how you approach an intermittent that only appears in flight. Installation shops value harness fabrication and panel work; repair stations value component-level bench skill. Both check how carefully you document and test what you install.
Describe the work in the units the trade uses: square footage, linear feet, tonnage, service calls per day, machines run, crew size. Add safety record and callback rate if you have them, because on a job site those are worth as much as speed. If you have run a crew or trained apprentices, say so plainly — that is the difference between a hand and a lead.
A foreman reading this has a job starting Monday. Put your licence class, your certifications with their dates, and the equipment you can operate at the very top — above the work history — because that is the information that decides whether you get the call. Save the paragraph-style summary for one or two lines at most.
Technician to lead avionics technician, then installation supervisor, repair station inspector or engineering support on modification programmes. Certification and modification work is the usual off-the-floor route.
Check every certification date is current and every licence number is right, since these are verified and an expired ticket ends an application. Keep the file simple: one column, no graphics, no tables. Our free ATS checker will confirm it parses, which matters because large contractors and staffing agencies screen automatically.
Licence class, current tickets with their dates, and the equipment you can operate — all of it above the work history — then jobs described in the units the trade uses, your safety record, and any crew or apprentice responsibility. One page, one column, no graphics.
Which tickets are required depends on the trade, the jurisdiction and the site, and the posting sets it out. Whatever you hold matters more than anything else on the page, so list every one with its issue and expiry date — these are verified, and an expired certification ends an application regardless of the work history behind it.
Hiring in the trades is fast and often informal — a call, a short conversation, sometimes a day on site to see how you work. Referral and reputation count for more than in most fields, so how you leave one job affects the next one.
Your licence class, your current tickets, and when you can start. A foreman with a job beginning next week reads for whether you are legally able to do the work and free to do it, and the rest of the page waits behind those two answers.
The usual route runs from apprentice to journey level to lead hand or foreman, and from there into supervision, estimating or running your own work. Crew leadership and apprentice training are the lines that show you are ready for that step.
One page. Employers in this field read quickly and often on a phone, and a second page rarely gets opened. Cut old short-term roles before you cut certifications or equipment experience.
Use the structure and the way each achievement is phrased, but write your own content. The names and employers here are fictional, and a resume describing work you did not do will not survive an interview.
Start from this layout, edit in a live preview with an ATS score as you type, and download as PDF, Word or image — free.
Use This Example — Free
